Recommendations for the use and maintenance of roller skates

1. Avoid sliding on wet, sandy, greasy ground.​roller skate suppliers， Water and dirt entering the bearing can reduce the sealing and rolling performance of the bearing.


2. Replace worn brakes and wheels as soon as possible. Rubber brake pads and polyurethane wheels with good abrasion resistance can be used.


3. Do not squeeze the bearing hard when removing the wheel, otherwise it will cause dust to enter the bearing or deform the bearing. After sliding for a period of time, the wheels and bearings should be checked, and if they are loose, they should be tightened or replaced in time.


4. After use, clean the upper with a damp cloth, do not immerse it in water to wash or apply corrosive reagents. Roller skates should be placed in a cool place to dry, not exposed to the sun or baked.



like：

​What to pay attention to when buying roller skates    

​Novices should pay attention to choosing roller skates   

​Considerations when buying roller skates  

Comments

Post a Comment

Popular posts from this blog

What is the function of the sound card

Function 1: Play digital music This is the most basic function of the sound card, from the original wav to the popular mp3, to the emerging wma and other audio formats,  live sound card   ,making digital music accepted by the majority of users. Function 2: Recording This is also one of the most basic functions of the sound card, collecting the signal from the microphone. With her, you can karaoke on the computer, entertain yourself, and have a lot of fun. Function three: voice communication The cost of voice communication on the network is low. Using PC to PC voice communication is a very cost-effective method. Thanks to the improvement of the current network conditions, the communication quality has also been greatly improved. like: Why you need to use an external sound card  What is the use of the sound card in the live broadcast device?   Can a sound card make the sound better? 
Read more

How to divide the IP waterproof level of earphones

How to divide the IP waterproof level of headphones? The IP waterproof level can be divided into 8 levels.  ​Waterproof Wired Earphones ， Let's see how these 8 levels are distinguished? IPX1: stands for vertical dripping, dripping in the vertical direction has no effect, the water flow is 1mm/min, and the test is 10min. IPX2: 15 degrees of water dripping, when the vertical surfaces of the housing are inclined within 15 degrees, the vertical dripping water should have no harmful effect, the water flow is 3mm/min, and each inclined position is 2.5min. IPX3: Each vertical surface is exposed to rain within a range of 60 degrees, without harmful effects, the water flow is 10L/min, and the test time is 10min. IPX4: splashing water, splashing water in all directions of the casing has no effect, each vertical surface is exposed to rain within a range of 180 degrees, the water flow is 10L/min, and the test time is 10min. IPX5: water spray, no effect on the shell in all directions, the water
Read more

Advantages of using DOB drivers?

Advantages of using DOB drivers? dob led   Has the following advantages: Ultra-thin and ultra-light, saving transportation costs; Fully automatic SMT, saving labor costs and reducing defective product rate; Over-temperature protection, IC chip and LED are on the same PCB, prolonging the life of LED; Almost no electrolytic capacitor components are used, which is more stable and reduces costs; Instant on, faster than traditional lights; Now in the LED field, the trend is to be simpler, more compact and more economical. Under this trend, IC solutions emerge as the times require, and the DOB technology market is growing by more than 200% annually.   like: About DOB and some misunderstandings in understanding What is DOB technology? What is the principle? The manufacturing principle of DOB light board 
Read more